- Build and Install Linux System for SMARC-iMX8MP (Dual and Quad Core)
- Availability
- Carrier Board
- Basic Resources
- ARM Cross Compiler: GCC
- Generating SSH Keys
- Boot File: flash.bin
- Linux Kernel
- Root File System
- Setup SD Card
- Install Root File System and Kernel Modules
- Setup eMMC
- Install Root File System
- Video Decoding
- WiFi
Build and Install Linux System for SMARC-iMX8MP (Dual and Quad Core)
This document provides instructions for advanced users how Embedian offers patches and builds a customized version of u-boot and linux kernel for Embedian's SMARC-iMX8MP product platform and how to install the images to bring the evaluation board up and running.
Our aim is to fully support our hardware through device drivers. We also provide unit tests so that testing a board is easy and custom development can start precisely.
The host Linux machine is recommended Ubuntu 20.04 or 22.04.
Once you have Ubuntu 20.04 or 22.04 LTS running, install the additional required support packages using the following console command:
Availability
SMARC-iMX8MP at Embedian
Carrier Board
SBC-SMART-BEE (module and carrier board) at Embedian
SBC-SMART-MEN (module and carrier board) at Embedian
EVK-STD-CARRIER-S20 (universal carrier board for all SMARC 1.1 and 2.0 modules) at Embedian
Basic Resources
- ARM Cross Compiler
- Bootloader
- Das U-Boot – the Universal Boot Loader http://www.denx.de/wiki/U-Boot
- Source – http://git.denx.de/?p=u-boot.git;a=summary
- Linux Kernel
- Linus's Mainline tree: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=summary
- NXP Linux source tree: git://github.com/nxp-imx/linux-imx.git
- NXP Yocto BSP meta layer: https://github.com/nxp-imx/meta-imx/meta-bsp
- Freescale community BSP release: https://github.com/Freescale/meta-freescale-distro
- Embedian SMARC-iMX8MP Linux kernel source tree: git@git.embedian.com:developer/smarc-fsl-linux-kernel.git or git@github.com:embedian/smarc-fsl-linux-kernel.git
- ARM based rootfs
- Debian Squeeze: http://www.debian.org/
- Debian Squeeze: http://www.debian.org/
ARM Cross Compiler: GCC
This is a pre-built (32bit) version of Linaro GCC that runs on generic linux, so 64bit users need to make sure they have installed the 32bit libraries for their distribution.
debian based | extra | pkgs: (sudo apt-get update ; sudo apt-get install xyz) |
---|---|---|
Ubuntu 20.04 |
| ia32-libs |
Debian 11 (Bullseye) | sudo dpkg --add-architecture i386 | libc6:i386 libstdc++6:i386 libncurses5:i386 zlib1g:i386 |
Ubuntu 20.10 -> 22.04 |
| libc6:i386 libstdc++6:i386 libncurses5:i386 zlib1g:i386 |
Red Hat/Centos/Fedora |
| libstdc++.i686 ncurses-devel.i686 zlib.i686 |
Red Hat based (rpm) | extra | pkgs: (yum install xyz) |
Red Hat/Centos/Fedora |
| libstdc++.i686 ncurses-devel.i686 zlib.i686 |
Ubuntu 22.04 |
| ia32-libs |
Ubuntu 20.10 -> 22.04 |
| libc6:i386 libstdc++6:i386 libncurses5:i386 zlib1g:i386 |
To build Embedian’s SMARC-iMX8MP u-boot and linux kernel, you will need to install the following ARM compiler:
For u-boot 2022.04, you need to use the following Arm compiler.
Test:
If this test fails, verify that you have the 32bit libraries installed on your development system.
Generating SSH Keys
We recommend you use SSH keys to establish a secure connection between your computer and Embedian Gitlab server. The steps below will walk you through generating an SSH key and then adding the public key to our Gitlab account.
Step 1. Check for SSH keys
First, we need to check for existing ssh keys on your computer. Open up Git Bash and run:
Check the directory listing to see if you have a file named either id_rsa.pub
or id_dsa.pub
. If you don't have either of those files go to step 2. Otherwise, you already have an existing keypair, and you can skip to step 3.
Step 2. Generate a new SSH key
To generate a new SSH key, enter the code below. We want the default settings so when asked to enter a file in which to save the key, just press enter.
Step 3. Add your SSH key to Embedian Gitlab Server
Copy the key to your clipboard.
Go to Embedian Git Server. At Profile Setting --> SSH Keys --> Add SSH Key
Paste your public key and press "Add Key" and your are done.
Boot File: flash.bin
The boot file is called flash.bin. It is made up of some pieces of programs. This section instruct you how to generate flash.bin.
1. Download the imx-mkimage tool and apply Embedian's patch to accept Embedian's device tree blob.
2. Get and Build the ARM Trusted firmware and copy bl31.bin to imx-mkimage/iMX8MP directory.
3. Get the DDR firmware and copy to imx-mkimage/iMX8M/ directory.
4. Clone the U-Boot source code from Embedian Git Server and copy related files to imx-mkimage/iMX8M/ directory.
Download:
For u-boot v2022.04:
Configure and Build:
Copy u-boot-nodtb.bin spl/u-boot-spl.bin arch/arm/dts/imx8mp-smarc.dtb
to imx-mkimage/iMX8M
directory and copy tools/mkimage
to imx-mkimage/iMX8M/mkimage_uboot
5. Generate flash.bin file.
The flash.bin file will be located at imx-mkimage/iMX8M directory. Go to "Setup SD Card" section to instruct you how to flash this file into SD card.
Linux Kernel
Download:
For 5.15.71 (Based on NXP imx_lf-5.15.y official release):
Configure and Build:
Selecting display configuration is a matter of selecting an appropriate DTB file under arch/arm64/boot/dts/embedian
.
All available DTB files are listed in the table below.
DTB File Name | Description |
---|---|
imx8mp-smarc.dtb | Device tree blob for no display configuration. |
imx8mp-smarc-hdmi.dtb | Device tree blob for HDMI display configuration. |
imx8mp-smarc-lvds.dtb | Device tree blob for LVDS display configuration. |
imx8mp-smarc-m7.dtb | Device tree blob for Cortex-M7 co-processor configuration. |
Root File System
Debian 11 Bullseys:
User | Password |
---|---|
root | root |
Debian 11 Bullseye Download:
Verify:
Yocto Kirkstone Build Root File System:
User | Password |
---|---|
root | N/A |
Find the yocto pre-built root file systems here at Embedian's ftp site based on your module CPU variants.
Setup SD Card
For these instruction, we are assuming: DISK=/dev/mmcblk0, "lsblk" is very useful for determining the device id.
Erase SD card:
Create Partition Layout:
With util-linux v2.26, sfdisk was rewritten and is now based on libfdisk.
Create Partitions:
Format Partitions:
Mount Partitions:
On some systems, these partitions may be auto-mounted...
Install Boot File
If on-module eMMC Flash is empty
In some cases, when eMMC flash is erased or the u-boot is under development, we need a way to boot from SD card first. Users need to shunt cross the TEST# pin to ground. In this way, SMARC-iMX8MP will always boot up from SD card.
Fuse flash.bin to the SD card.
If on-module eMMC Flash is not empty
The flash.bin is pre-installed in on-module eMMC flash at factory default. SMARC-iMX8MP is designed to always boot up from on-module eMMC flash and to load Image, device tree blob and root file systems based on the setting of BOOT_SEL. If users need to fuse your own flash.bin or perform u-boot upgrade. This section will instruct you how to do that.
Copy flash.bin to the second partition home directory of your SD card and boot into SD card. Go to home directory and you should see flash.bin file (The flash.bin file is located at imx-mkimage/iMX8M/ directory).
Fuse flash.bin to the on-module eMMC flash. (The eMMC flash is emulated as /dev/mmcblk2 in SMARC-iMX8MP)
uEnv.txt based bootscript
Create "uEnv.txt" boot script: ($ vim uEnv.txt)
Copy uEnv.txt to the boot partition:
Install Kernel Image
Copy Image to the boot partition:
Install Kernel Device Tree Binary
All available DTB files are listed in the table below.
DTB File Name | Description |
---|---|
imx8mp-smarc.dtb | Device tree blob for no display configuration. |
imx8mp-smarc-hdmi.dtb | Device tree blob for HDMI display configuration. |
imx8mp-smarc-lvds.dtb | Device tree blob for LVDS display configuration. |
imx8mp-smarc-m7.dtb | Device tree blob for Cortex-M7 co-processor configuration. |
Install Root File System and Kernel Modules
Copy Root File System:
Yocto Pre-Built Rootfs:
Debian 11 Bulleyes:
Copy Kernel Modules:
Networking:
Edit: /etc/network/interfaces
Add:
Remove SD card:
Setup eMMC
Setting up eMMC usually is the last step at development stage after the development work is done at your SD card or NFS environments. From software point of view, eMMC is nothing but a non-removable SD card on board. For SMARC-iMX8MP, the SD card is always emulated as /dev/mmcblk1 and on-module eMMC is always emulated as /dev/mmcblk2. Setting up eMMC now is nothing but changing the device descriptor.
This section gives a step-by-step procedure to setup eMMC flash. Users can write a shell script your own at production to simplify the steps.
First, we need to backup the final firmware from your SD card or NFS.
Prepare for eMMC binaries from SD card (or NFS):
Insert SD card into your Linux PC. For these instructions, we are assuming: DISK=/dev/mmcblk0, "lsblk" is very useful for determining the device id.
For these instruction, we are assuming: DISK=/dev/mmcblk0, "lsblk" is very useful for determining the device id.
Mount Partitions:
On some systems, these partitions may be auto-mounted...
Copy Image to rootfs partition:
Copy uEnv.txt to rootfs partition:
Copy and paste the following contents to /media/rootfs/home/root
($ sudo vim /media/rootfs/home/root/uEnv.txt
)
Copy device tree blob to rootfs partition:
Copy boot file to rootfs partition:
Copy real rootfs to rootfs partition:
Yocto Built Root File Systems
Debiab Bulleyes Root File Systems
Unmount SD card.
It is safe to remove SD card now.
Copy Binaries to eMMC from SD card:
Insert this SD card into your SMARC-iMX8MP device and boot into SD card.
Now it will be almost the same as you did when setup your SD card, but the eMMC device descriptor is /dev/mmcblk2 now.
Erase SD card:
Create Partition Layout:
Format Partitions:
Mount Partitions:
Install binaries for partition 1
Copy uEnv.txt/Image/*.dtb to the boot partition
Install Kernel Device Tree Binary
Install Root File System
Unmount eMMC:
Flash boot file
Switch your Boot Select to eMMC (OFF ON ON) and you will be able to boot up from eMMC now.
Video Decoding
For playing video, we can use three solutions to support it.
a) # gplay-1.0 <video file>
b) # gst-launch-1.0 playbin uri=file://<video absolute path>
c) ( i ) if video container on .mp4 format
# gst-launch-1.0 filesrc location=<file name.mp4> typefind=true ! video/quicktime ! qtdemux ! queue max-size-time=0 ! vpudec ! queue max-size-time=0 ! kmssink force-hantrope=true sync=false &
( ii ) if video container on .ts format
# gst-launch-1.0 filesrc location=<file name.ts> typefind=true ! video/mpegts ! tsdemux ! queue max-size-time=0 ! vpudec ! queue max-size-time=0 ! waylandsink
WiFi
The BSP includes NXP 88W8997 wifi chipset. Users can choose mPCIe or M.2 key E form factor wifi modules based on NXP 88W8997 chipset.
M.2 Form Factor:
AzureWave P/N: AW-CM276MA-PUR
Laird Connectivity P/N: 60-2230C
Embedded Artists 1YM M.2 Module
mPCIe Factor:
Globascale Technologies NXP 88W8997 2x2 WiFi 802.11ac+BT 5.0 mini PCIe Card w/ Two External SMA Antennas
Boot up the device and load the driver modules in the kernel.
Verify that the module is now visible to the system.
In case you need to see which network and you can scan it and select the one you need.
Identify the network and add it to the WPA supplicant file.
Associate the Wi-Fi with config
Check if you have right SSID associated.
Use DHCP to get IP
You should be able to ping local network now.
Modify /etc/resolv.conf of your preference, you will be able to ping out.
version 1.0a, 08/09/2023
Last updated 2023-08-09