On this page:

Building Freescale/Embedian’s Android Q10.0.0_2.6.0 BSP Distribution

Eric Lee

version 1.0a, 11/24/2021

Introduction


This document describes how to build and deploy Android Oreo on the SMARC-iMX8M. It is based on NXP's IMX8M_Q10.0.0_2.6.0 ANDROID release.

 

Generating SSH Keys


In order to download u-boot and kernel from Embedian. We recommend you use SSH keys to establish a secure connection between your computer and Embedian Gitlab server. The steps below will walk you through generating an SSH key and then adding the public key to our Gitlab account. 

Step 1. Check for SSH keys


First, we need to check for existing ssh keys on your computer. Open up Git Bash and run: 

$ cd ~/.ssh
$ ls
# Lists the files in your .ssh directory

 Check the directory listing to see if you have a file named either id_rsa.pub or id_dsa.pub. If you don't have either of those files go to step 2. Otherwise, you already have an existing keypair, and you can skip to step 3. 

Step 2. Generate a new SSH key


 To generate a new SSH key, enter the code below. We want the default settings so when asked to enter a file in which to save the key, just press enter.

$ ssh-keygen -t rsa -C "your_email@example.com"
# Creates a new ssh key, using the provided email as a label
# Generating public/private rsa key pair.
# Enter file in which to save the key (/c/Users/you/.ssh/id_rsa): [Press enter]
$ ssh-add id_rsa

 Now you need to enter a passphrase.

Enter passphrase (empty for no passphrase): [Type a passphrase]
Enter same passphrase again: [Type passphrase again]

 Which should give you something like this:

Your identification has been saved in /c/Users/you/.ssh/id_rsa.
Your public key has been saved in /c/Users/you/.ssh/id_rsa.pub.
The key fingerprint is:
01:0f:f4:3b:ca:85:d6:17:a1:7d:f0:68:9d:f0:a2:db your_email@example.com

Step 3. Add your SSH key to Embedian Gitlab Server


 Copy the key to your clipboard.

$ cat ~/.ssh/id_rsa.pub
ssh-rsa AAAAB3NzaC1yc2EAAABDAQABAAABAQDQUEnh8uGpfxaZVU6+uE4bsDrs/tEE5/BPW7jMAxak
6qgOh6nUrQGBWS+VxMM2un3KzwvLRJSj8G4TnTK2CSmlBvR+X8ZeXNTyAdaDxULs/StVhH+QRtFEGy4o
iMIzvIlTyORY89jzhIsgZzwr01nqoSeWWASd+59JWtFjVy0nwVNVtbek7NfuIGGAPaijO5Wnshr2uChB
Pk8ScGjQ3z4VqNXP6CWhCXTqIk7EQl7yX2GKd6FgEFrzae+5Jf63Xm8g6abbE3ytCrMT/jYy5OOj2XSg
6jlxSFnKcONAcfMTWkTXeG/OgeGeG5kZdtqryRtOlGmOeuQe1dd3I+Zz3JyT your_email@example.c
om

Go to Embedian Git Server. At Profile Setting --> SSH Keys --> Add SSH Key 

Paste your public key and press "Add Key" and your are done.

Overview of this document


The objective of this document is to guide SMARC-iMX8M Android developers to obtain Android Q10.0.0_1.0.0 sources, setting up host environment, compilation and deployment.

This document contains instructions for:

Hardware Requirement


EVK-STD-CARRIER-S20 and SMARC-iMX8M. 

Host (PC) setup requirements

The host development environment for Android is based on Ubuntu and Debian, please install Ubuntu version 16.04 64bit LTS http://www.ubuntu.com/download/desktop or Debian 9.6 64bit https://www.debian.org/releases

Do not use other Ubuntu or Debian releases, than recommended above.

Install required packages on host PC

$ sudo apt-get -y install git-core gnupg flex bison gperf build-essential zip curl zlib1g-dev gcc-multilib g++-multilib 	
$ sudo apt-get -y install libc6-dev-i386 lib32ncurses5-dev x11proto-core-dev libx11-dev lib32z-dev ccache libgl1-mesa-dev libxml2-utils 
$ sudo apt-get -y install xsltproc unzip mtd-utils u-boot-tools lzop liblzo2-2 liblzo2-dev zlib1g-dev liblz-dev uuid uuid-dev android-tools-fsutils

Install the OpenJDK

$ sudo apt-get update 
$ sudo apt-get install openjdk-8-jdk


Update the default Java version by running:

$ sudo update-alternatives --config java 
$ sudo update-alternatives --config javac

The build machine should have at least 50GB of free space to complete the build process.

Obtain Source Code


Get NXP's Android Release Package

Go to NXP's website, download Q10.0.0_2.6.0_ANDROID_SOURCE (filename: imx-android-10.0.0_2.6.0.tar.gz and put into your ~/downloads directory.

$ cd ~/downloads
$ tar xvfz imx-android-10.0.0_2.6.0.tar.gz

Obtain Google Android Q10.0.0_2.6.0 source code and Apply NXP's patch

$ mkdir -p ~/android/smarcimx8mq/q_1000_260 
$ cd ~/android/smarcimx8mq/q_1000_260
$ mkdir ~/bin 
$ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo 
$ chmod a+x ~/bin/repo 
$ export PATH=~/bin:$PATH 
$ mv ~/download/imx-android-10.0.0_2.6.0 .
$ source imx-android-10.0.0_2.6.0/imx_android_setup.sh

After done, it will create an android_build directory. Go to this directory.

Clone Embedian's U-Boot (2020.04) and Linux kernel (5.4.70) sources

$ cd ~/android/smarcimx8mq/q_1000_260/android_build
$ mkdir -p vendor/embedian
$ cd vendor/embedian
$ git clone git@git.embedian.com:developer/smarc-t335x-uboot.git uboot-imx -b smarc-8m-android-10.0.0_2.6.0
$ git clone git@git.embedian.com:developer/smarc-fsl-linux-kernel.git kernel_imx -b smarc-8m-android-10.0.0_2.6.0

Apply Embedian's patches for  i.MX8M platforms

$ cd ~/android/smarcimx8mq/q_1000_260/android_build/device
$ git clone git@git.embedian.com:developer/smarc-imx8m-android.git embedian -b smarc-8mq-q10.0.0_2.6.0
$ embedian/scripts/install.sh

Build Android Images


Change to Android top level directory.
$ export MY_ANDROID=~/android/smarcimx8mq/q_1000_260/android_build
$ cd ${MY_ANDROID}
$ source build/envsetup.sh
$ export JAVA_HOME=/usr/lib/jvm/java-1.8.0-openjdk-amd64
$ export PATH=$JAVA_HOME/bin/:$PATH
$ lunch smarc_mx8mq-eng
or
$ lunch smarc_mx8mq-userdebug
$ ./imx-make.sh -j4 2>&1 | tee build-1.log

userdebug build creates a debuggable version of Android. eng build creates an engineering version of Android. Development mode enable and development tools are available on target.

The commands below can achieve the same result as "./imx-make.sh -j4 2>&1 | tee build-1.log":

$ ./imx-make.sh bootloader kernel -j4 2>&1 | tee build-log.txt
# Build U-Boot/kernel with imx-make.sh first, but not to build Android images.
$ make -j4 2>&1 | tee -a build-log.txt
# Start the process of build Android images with "make" function.

Images created by the Android build for SMARC-iMX8M system

The images created are located at out/target/product/smarc_mx8m/ directory.

ImageDescription
u-boot-imx8mq-smarc_2g.imx

Bootloader for eMMC/SD card boot for SMARC-iMX8M-D/Q/L-2G(-I)

Other SMARC variants could be defined at device/embedian/imx8m/smarc_mx8mq/BoardConfig.mk

u-boot-imx8mq-smarc_2g-uuu.imx

Bootloader used by uuu for eMMC/SD card boot for SMARC-iMX8M-D/Q/L-2G(-I)

Other SMARC variants could be defined at device/embedian/imx8m/smarc_mx8mq/BoardConfig.mk

u-boot-imx8mq-trusty-smarc_2g.imx

Trusty Bootloader for eMMC/SD card boot for SMARC-iMX8M-Q/L-2G(-I)

Other SMARC variants could be defined at device/embedian/imx8m/smarc_mx8mq/BoardConfig.mk

u-boot-imx8mq-trusty-secure-unlock-smarc_2g.imx

Trusty Bootloader for eMMC/SD card boot for SMARC-iMX8M-Q/L-2G(-I)

Other SMARC variants could be defined at device/embedian/imx8m/smarc_mx8mq/BoardConfig.mk

It is a demonstration of secure unlock mechanism.

u-boot-imx8mq-smarc_4g.imx

Bootloader for eMMC/SD card boot for SMARC-iMX8M-D/Q/L-4G(-I)

Other SMARC variants could be defined at device/embedian/imx8m/smarc_mx8mq/BoardConfig.mk

u-boot-imx8mq-smarc_4g-uuu.imx

Bootloader used by uuu for eMMC/SD card boot for SMARC-iMX8M-D/Q/L-4G(-I)

Other SMARC variants could be defined at device/embedian/imx8m/smarc_mx8mq/BoardConfig.mk

u-boot-imx8mq-trusty-smarc_4g.imx

Trusty Bootloader for eMMC/SD card boot for SMARC-iMX8M-Q/L-4G(-I)

Other SMARC variants could be defined at device/embedian/imx8m/smarc_mx8mq/BoardConfig.mk

u-boot-imx8mq-trusty-secure-unlock-smarc_4g.imx

Trusty Bootloader for eMMC/SD card boot for SMARC-iMX8M-Q/L-4G(-I)

Other SMARC variants could be defined at device/embedian/imx8m/smarc_mx8mq/BoardConfig.mk

It is a demonstration of secure unlock mechanism.

boot.imgBoot image for SMARC-iMX8M. It contains kernel, a part of ramdisk, and default kernel command line.
partition-table.imgGPT table image for 16GB SD card and eMMC.
partition-table-7GB.imgGPT table image for 8GB SD card and eMMC.
partition-table-28GB.imgGPT table image for 28GB SD card and eMMC.
system.imgSystem image
vbmeta-imx8mq-<dtb_feature>.imgAndroid Verified Boot metadata Image for SMARC-iMX8M to support different display output
vendor.imgVendor image
dtbo-<dtb_feature>.imgDevice Tree image for SMARC-iMX8M to support different display output
product.imgProduct image for SMARC-iMX8M
super.imgSuper image generated from system.img, system_ext.img, vendor.img, and product.img.
<dtb_feature>

<blank> Support no display configuration.

hdmi Support HDMI display configuration (DCSS).

dp Support Display Port (DP) display configuration (DCSS).

lcdif-lvds Support LCDIF LVDS display configuration.

dcss-lvds Support DCSS LVDS display configuration.

dual-display Support dual LVDS+HDMI display configuration.

DCSS vs LCDIF

i.MX8M comes with 2 display controllers: DCSS and LCDIF.

 DCSS can be connected to either HDMI or MIPI-DSI (to LVDS bridge) and supports resolutions up to 4K.

 LCDIF can be connected only to MIPI-DSI and supports resolutions up to 1080p.

UUU Scripts

 The table below describes the UUU scripts in android_q10.0.0_2.6.0. They are used with the UUU binary file to download the images above into SMARC-iMX8M SMARC modules.

UUU Script nameFunction
uuu-android-smarc-mx8mq-emmc.lstUsed with the UUU binary file to download image files into
eMMC.
uuu-android-smarc-mx8mq-sd.lstUsed with the UUU binary file to download image files into
SD card.
uuu_android_smarc_flash.batScript to generate lst file on Windows OS
uuu_android_smarc_flash.shScript to generate lst file on Linux OS


Setup SD card


 Prepare for an SD card and insert into your Linux host PC

$ cp smarc-mksdcard.sh out/target/product/smarc_mx8mq/ 
$ cd out/target/product/smarc_mx8mq/ 
$ chmod a+x smarc-mksdcard.sh 
$ sudo ./smarc-mksdcard.sh -f imx8mq -d <dtb_feature> -u <uboot_feature> /dev/sdX; sync

 

 

<dtb_feature>

N/A Support no display configuration.

hdmi Support HDMI display configuration (DCSS).

dp Support Display Port (DP) display configuration (DCSS).

lcdif-lvds Support LCDIF LVDS display configuration.

dcss-lvds Support DCSS LVDS display configuration.

dual-display Support dual LVDS+HDMI display configuration.


<uboot_feature>

smarc_2g If the LPDDR4 memory capacity on your module is 2GB.

smarc_4g If the LPDDR4 memory capacity on your module is 4GB.

  1. The minimum size of the SD card is 8 GB.
  2. /dev/sdX, the X is the disk index from 'a' to 'z'. That may be different on each computer running Linux OS.

  3. If the SD card is 16 GB, use "sudo ./smarc-mksdcard.sh -f smarcimx8mq -d <name> -u <uboot_feature> /dev/sdX" to flash images.

  4. If the SD card is 8 GB, use "sudo ./smarc-mksdcard.sh -f smarcimx8mq -d <name> -u <uboot_feature> -c 7 /dev/sdX" to flash images.
  5. If the SD card is 32 GB, use "sudo ./smarc-mksdcard.sh -f smarcimx8mq -d <name> -u <uboot_feature> -c 28 /dev/sdX" to flash images.

If primary display set to HDMI, a VESA standard HDMI display need to be connected before booting up.

 

Insert the SD card into your device, set the BOOT_SEL to "ON OFF OFF" and shut cross the TEST# pin to Ground. You will be able to see Android booting up. For eMMC boot, leave the TEST# floating and the BOOT_SEL should be set as "OFF ON ON". The next section will instruct you to flash eMMC.

Setup eMMC


Setup eMMC for Android is a bit complex, but trivial. There are a couple of ways to achieve it. 

Use UUU


UUU can be used to download all images into a target device. It is a quick and easy tool for downloading images. See the AndroidTM Quick Start Guide (AQSUG) for detailed description of UUU.

Make sure that the FORCE_RECOV# pin has to be shunt to Ground to enter into CPU serial download mode when using this tool. Connect USB0 min-B port of the device to your host computer.

Copy uuu.exe, u-boot-imx8mq-<u-boot_feature>.imx, u-boot-imx8mq-smarc_2g-uuu.imx, u-boot-imx8mq-smarc_4g-uuu.imx, partition-table.img, boot.img, vbmeta-<dtb_feature>.img, product.img, system.img, vendor.img, lpmake.exe, dtbo-<dtb_feature> and uuu_android_smarc_flash.bat into the same folder.

$ .\uuu_android_smarc_flash.bat -f imx8mq -d <dtb_feature> -u <uboot_feature> -e

 

 

<dtb_feature>

hdmi Support HDMI display configuration (DCSS).

dp Support Display Port (DP) display configuration (DCSS).

lcdif-lvds Support LCDIF LVDS display configuration.

dcss-lvds Support DCSS LVDS display configuration.

dual-display Support dual LVDS+HDMI display configuration.


<uboot_feature>

smarc_2g If the LPDDR4 memory capacity on your module is 2GB.

smarc_4g If the LPDDR4 memory capacity on your module is 4GB.

trusty-smarc_2g Trusty OS, if the LPDDR4 memory capacity on your module is 2GB.

trusty-smarc_4g Trusty OS, if the LPDDR4 memory capacity on your module is 4GB.

 

After done, make sure that FORCE_RECOV# and TEST# pins are floating. Change the BOOT_SEL to OFF ON ON and the module will boot up from eMMC. 

Use a Ubuntu 18.04 Bootable SD card


The second way that we also recommend is to make a bootable Ubuntu 16.04 SD card for SMARC-iMX8M. User go to our   Linux Development Site  to learn how to make a bootable Ubuntu 16.04 SD card. An pre-built images can be downloaded from our ftp site. Users can download those images and follow the "Setup SD card" section from our Linux development site. Once it done, you can copy the smarc-mksdcard.sh script and all Android images (u-boot-imx8mq-smarcimx8mq-2g.imx, u-boot-imx8mq-smarcimx8mq-4g.imx, partition-table.img, boot.img, vbmeta-<name>.img, system_raw.img, vendor_raw.img, dtbo-<name>, smarc-mkemmccard.sh) into your home directory. Follow exactly what you did for SD card, but now, eMMC device will be emulated as /dev/mmcblk0.  

$ sudo ./smarc-mkemmccard.sh -f imx8mq -d <dtb_feature> -u <uboot_feature> /dev/mmcblk0; sync

 

 

<dtb_feature>

N/A Support no display configuration.

hdmi Support HDMI display configuration (DCSS).

dp Support Display Port (DP) display configuration (DCSS).

lcdif-lvds Support LCDIF LVDS display configuration.

dcss-lvds Support DCSS LVDS display configuration.

dual-display Support dual LVDS+HDMI display configuration.


<uboot_feature>

smarc_2g If the LPDDR4 memory capacity on your module is 2GB.

smarc_4g If the LPDDR4 memory capacity on your module is 4GB.

trusty-smarc_2g Trusty OS, if the LPDDR4 memory capacity on your module is 2GB.

trusty-smarc_4g Trusty OS, if the LPDDR4 memory capacity on your module is 4GB.

 

Power off and set BOOT_SEL to "OFF ON ON", leave the TEST# pin floating and you will be able to boot up your Android from on-module eMMC.


Android Recovery Mode


Enter board in Android Recovery mode

Shunt LID# pin to ground will enter Android Recovery mode.

Update Android Firmware

Generate OTA Packages

For generating "OTA" packages, use the following commands:

$ cd ${MY_ANDROID}
$ make PRODUCT=smarc_mx8mq-userdebug -j4 otapackage 2>&1 | tee build1-1.log

Install OTA Packages to device 

  1. Enter to Android Recovery mode
  2. Select menu item "apply update from ADB" 
  3. To the host system, perform the following command:
$ out/host/linux-x86/bin/adb sideload out/target/product/smarc_mx8mq/smarc_mx8mq-ota-<data>-<name>.zip

smarc_mx8mq-ota-${date}.zip includes payload.bin and payload_properties.txt . The two files are used for full update.

Reboot the device.

Real example name for OTA package: out/target/product/smarc_mx8mq/smarc_mx8mq-ota-20180416-smarcimx8mq-hdmi.zip

Manual Operations


Build boot.img


 When you perform changes to the kernel, you may build boot.img solely instead of building the whole Android.

$ cd ${MY_ANDROID}
$ source build/envsetup.sh
$ export JAVA_HOME=/usr/lib/jvm/java-1.8.0-openjdk-amd64
$ export PATH=$JAVA_HOME/bin/:$PATH
$ lunch smarc_mx8mq-eng
or
$ lunch smarc_mx8mq-userdebug
$ make bootimage

Manual build Bootloader


 

$ cd ${MY_ANDROID}
$ source build/envsetup.sh
$ export JAVA_HOME=/usr/lib/jvm/java-1.8.0-openjdk-amd64
$ export PATH=$JAVA_HOME/bin/:$PATH
$ lunch smarc_mx8mq-eng
or
$ lunch smarc_mx8mq-userdebug
$ ./imx-make.sh bootloader -j4

It will generate u-boot-imx8mq-smarc_2g.imx, u-boot-imx8mq-smarc_2g-uuu.imx, u-boot-imx8mq-smarc_2g-trusty.imx, u-boot-imx8mq-smarc_4g.imx, u-boot-imx8mq-smarc_4g-uuu.imx, and u-boot-imx8mq-smarc_4g-trusty.imx files.

Manual build Android Linux Kernel and modules


 

$ cd ${MY_ANDROID}
$ source build/envsetup.sh
$ export JAVA_HOME=/usr/lib/jvm/java-1.8.0-openjdk-amd64
$ export PATH=$JAVA_HOME/bin/:$PATH
$ lunch smarc_mx8mq-eng
or
$ lunch smarc_mx8mq-userdebug
$ ./imx-make.sh kernel -j4

The kernel images are found in ${MY_ANDROID}/out/target/product/smarc_mx8mq/obj/KERNEL_OBJ/arch/arm64/boot/Image


version 1.0a, 11/24/2021

Last updated 2021-12-05

 

<name>

smarcimx8mq Support no display configuration.

smarcimx8mq-hdmi Support HDMI display configuration (DCSS).

smarcimx8mq-dp Support Display Port (DP) display configuration (DCSS).

smarcimx8mq-edp Support Embedded Display Port (eDP) display configuration (DCSS).

smarcimx8mq-lcdif-lvds Support LCDIF LVDS display configuration.

smarcimx8mq-dcss-lvds Support DCSS LVDS display configuration.

smarcimx8mq-dual-display Support dual LVDS+HDMI display configuration.


Trusty Bootloader for eMMC/SD card boot for SMARC-iMX8M-Q/L-2G(-I)

Other SMARC variants could be defined at device/embedian/imx8m/smarc_mx8mq/BoardConfig.mk