Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Freescale makes their i.MX series official bsp build scripts available via the following GIT repository:

Info
iconfalse

git://git.freescale.com/imx/meta-fsl-bsp-release

 

Freescale community BSP release build script is available via the following repository: 

 

Info
iconfalse

git://git.freescale.com/imx/fsl-arm-yocto-bsp.git

It is this repository that actually pulls in the fsl-bsp-release project to perform the Linux BSP builds for NXP's i.MX8M Plus ARM Cortext-A53 chips.  

Generating SSH Keys


 We recommend you use SSH keys to establish a secure connection between your computer and Embedian Gitlab server. The steps below will walk you through generating an SSH key and then adding the public key to our Gitlab account. 

Step 1. Check for SSH keys


First, we need to check for existing ssh keys on your computer. Open up Git Bash and run: 

Code Block
themeConfluence
languagecpp
$ cd ~/.ssh
$ ls
# Lists the files in your .ssh directory

 Check the directory listing to see if you have a file named either id_rsa.pub or id_dsa.pub. If you don't have either of those files go to step 2. Otherwise, you already have an existing keypair, and you can skip to step 3. 

Step 2. Generate a new SSH key


 To generate a new SSH key, enter the code below. We want the default settings so when asked to enter a file in which to save the key, just press enter.

Code Block
themeConfluence
languagecpp
$ ssh-keygen -t rsa -C "your_email@example.com"
# Creates a new ssh key, using the provided email as a label
# Generating public/private rsa key pair.
# Enter file in which to save the key (/c/Users/you/.ssh/id_rsa): [Press enter]
$ ssh-add id_rsa

 Now you need to enter a passphrase.

Code Block
themeConfluence
languagecpp
Enter passphrase (empty for no passphrase): [Type a passphrase]
Enter same passphrase again: [Type passphrase again]

 Which should give you something like this:

Code Block
themeConfluence
languagecpp
Your identification has been saved in /c/Users/you/.ssh/id_rsa.
Your public key has been saved in /c/Users/you/.ssh/id_rsa.pub.
The key fingerprint is:
01:0f:f4:3b:ca:85:d6:17:a1:7d:f0:68:9d:f0:a2:db your_email@example.com

Step 3. Add your SSH key to Embedian Gitlab Server


 Copy the key to your clipboard.

Code Block
themeConfluence
languagecpp
$ cat ~/.ssh/id_rsa.pub
ssh-rsa AAAAB3NzaC1yc2EAAABDAQABAAABAQDQUEnh8uGpfxaZVU6+uE4bsDrs/tEE5/BPW7jMAxak
6qgOh6nUrQGBWS+VxMM2un3KzwvLRJSj8G4TnTK2CSmlBvR+X8ZeXNTyAdaDxULs/StVhH+QRtFEGy4o
iMIzvIlTyORY89jzhIsgZzwr01nqoSeWWASd+59JWtFjVy0nwVNVtbek7NfuIGGAPaijO5Wnshr2uChB
Pk8ScGjQ3z4VqNXP6CWhCXTqIk7EQl7yX2GKd6FgEFrzae+5Jf63Xm8g6abbE3ytCrMT/jYy5OOj2XSg
6jlxSFnKcONAcfMTWkTXeG/OgeGeG5kZdtqryRtOlGmOeuQe1dd3I+Zz3JyT your_email@example.c
om

Go to Embedian Git Server. At Profile Setting --> SSH Keys --> Add SSH Key 

Paste your public key and press "Add Key" and your are done.

Overview of the meta-smarcimx8mp-gatesgarth Yocto Layer


The supplied meta-smarcimx8mp-gatesgarth Yocto compliant layer has the following organization:

Info
iconfalse

.
|-- conf
|   |-- layer.conf
|   |-- site.conf
|   |-- machine
|       |-- smarcimx8mp2g.conf
|       |-- smarcimx8mp4g.conf
|   |   `-- smarcimx8mp6g.conf
|-- README
|-- recipes-bsp
|   |-- u-boot
|       `-- u-boot-smarcimx8mp_2020.04.bb
|   |-- imx-vpu-hantro-vc
|       `-- imx-vpu-hantro-vc_1.3.0.bbappend
|   |-- alsa-state
|       |   |-- alsa-state
|       |   |   `-- asound.state
|       `-- alsa-state.bbappend
|   |-- pm-utils
|       `-- pm-utils_%.bbappend
|   |-- imx-mkimage
|       `-- imx-boot_1.0.bbappend

|-- recipes-core
|   |-- busybox
|       `-- busybox_%.bbappend
|       |   |-- busybox
|       |   |   |-- ftpget.cfg
|       |   |   `-- defconfig
|   |-- base-files
|       `-- base-files_%.bbappend
|       |   |-- base-files
|       |   |   |-- issue
|       |   |   `-- issue.net
|   |-- packagegroups
|       `-- packagegroup-core-tools-testapps.bbappend
|   |-- psplash
|       `-- psplash_git.bbappend
|       |   |-- files
|       |   |   |-- 0001-psplash-Change-colors-for-the-Embedian-Yocto-logo.patch
|       |   |   |-- psplash-poky.png
|       |   |   `-- psplash-bar.png
|   |-- udev
|       |   |-- files
|       |   |   |-- smarcimx8mp2g
|       |   |   |   `-- usb-power.rules
|       |   |   |-- smarcimx8mp4g
|       |   |   |   `-- usb-power.rules  
|       |   |   |-- smarcimx8mp6g
|       |   |   |   `-- usb-power.rules
|       `-- udev-rules-imx.bbappend
|-- recipes-support

|   |-- vim
|   |   `-- vim_%.bbappend
|-- recipes-kernel
|   |-- linux
|       `-- linux-smarcimx8mp_5.10.bb
`-- scripts
|   `-- emb_mk_yocto_sdcard


Notes on 
meta-smarcimx8mp-gatesgarth layer content

conf/machine/*

This folder contains the machine definitions for the smarcimx8mp2g/smarcimx8mp4g/smarcimx8mp6g platform and backup repository in Embedian. These select the associated kernel, kernel config, u-boot, u-boot config, and tar.bz2 image settings.

recipes-bsp/u-boot/*

This folder contains recipes used to build DAS U-boot for smarcimx8mp2g/smarcimx8mp4g/smarcimx8mp6g platform.

recipes-bsp/alsa-state/*

This folder contains sgtl5000 sound chip default state for smarcimx8mp2g/smarcimx8mp4g/smarcimx8mp6g platform.

recipes-bsp/imx-mkimage/*

This folder contains imx-mkimage tool for smarcimx8mp2g/smarcimx8mp4g/smarcimx8mp6g platform.

recipes-bsp/imx-vpu-hantro-vc/*

This folder adds compatible machine for smarcimx8mp2g/smarcimx8mp4g/smarcimx8mp6g platform

recipes-core/busybox/*

This folder remove telnetd from bysybox for smarcimx8mp2g/smarcimx8mp4g/smarcimx8mp6g platform.  

recipes-core/psplash/* 

This folder customized Yocto boot psplash for smarcimx8mp2g/smarcimx8mp4g/smarcimx8mp6g platform.

recipes-support/vim/* 

This folder fixes xwayland build error for smarcimx8mp2g/smarcimx8mp4g/smarcimx8mp6g platform.

recipes-kernel/linux/*

Contains the recipes needed to build the smarcimx8mp2g/smarcimx8mp4g/smarcimx8mp6g Linux kernels.

Setting Up the Tools and Build Environment


To build the latest NXP i.MX8M Plus fsl-bsp-release, you first need an Ubuntu 16.04 0r 18.04LTS installation. Since bitbake does not accept building images using root privileges, please do not login as a root user when performing the instructions in this section. 

Once you have Ubuntu 16.04 or 18.04 LTS running, install the additional required support packages using the following console command:

Info
iconfalse

$ sudo apt-get install gawk wget git-core diffstat unzip texinfo build-essential chrpath libsdl1.2-dev xterm python-m2crypto bc libsdl1.2-dev pv

If you are using a 64-bit Linux, then you'd also need to install 32-bit support libraries, needed by the pre-built Linaro toolchain and other binary tools.

Info
iconfalse

$ sudo dpkg --add-architecture i386
$ sudo apt-get update
$ sudo apt-get install curl g++-multilib gcc-multilib lib32z1-dev libcrypto++9v5:i386 libcrypto++-dev:i386 liblzo2-dev:i386 libusb-1.0-0:i386 libusb-1.0-0-dev:i386 uuid-dev:i386

 

To get the BSP you need to have 'repo' installed and use it as:

Install the 'repo' utility:

Info
iconfalse

$ mkdir ~/bin
$ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
$ chmod a+x ~/bin/repo
$ PATH=${PATH}:~/bin 


Download the BSP Yocto Project Environment.

Info
iconfalse

$ mkdir ~/smarc-imx8mp-gatesgarth-release

$ cd ~/smarc-imx8mp-gatesgarth-release

$ repo init -u https://source.codeaurora.org/external/imx/imx-manifest -b imx-linux-gatesgarth -m imx-5.10.9-1.0.0.xml

$ repo sync


Download the Embedian Yocto build script and meta layer.

 

Info
iconfalse

$ wget ftp://ftp.embedian.com/public/dev/minfs/smarc-imx8mp-bsp-release/smarcimx8mp-setup-release.sh

$ chmod 444 smarcimx8mp-setup-release.sh

$ cd sources

$ git clone git@git.embedian.com:developer/meta-smarcimx8mp.git meta-smarcimx8mp-gatesgarth -b 8mp_5.10.9_1.0.0_gatesgarth

$ cd ~/smarc-imx8mp-gatesgarth-release

$ DISTRO=fsl-imx-wayland MACHINE=smarcimx8mp4g source smarcimx8mp-setup-release.sh -b build-wayland 

Choose "y" to accept EULA.
This script will create and bring you to ~/smarc-imx8mp-gatesgarth-release/build-wayland directory.

 

Note
titleNote

The last line of the above script

$ DISTRO=<distro name> MACHINE=<machine name> source smarcimx8mp-setup-release.sh -b <build dir>

  1. <distro name> 
    • fsl-imx-x11 - Only X11 graphics
    • fsl-imx-wayland - Wayland weston graphics

    • fsl-imx-xwayland - Wayland graphics and X11. X11 applications using EGL are not supported

    • fsl-imx-fb - Frame Buffer graphics - no X11 or Wayland (Frame Buffer DISTRO is not supported on i.MX8M Plus.)

  2. <machine name>

    • smarcimx8mp2g - if your board is with 2GB LPDDR4.

    • smarcimx8mp4g - if your board is with 4GB LPDDR4.

    • smarcimx8mp6g - if your board is with 6GB LPDDR4.

The default console debug port is SER3.

In this document, we will use smarcimx8mp4g as the example of machine name. Users need to change different machine name if you have different SMARC card variants.

 
Building the target platforms

 To build Embedian/Freescale Yocto BSP, use the following commands:
Info
iconfalse

$ MACHINE=smarcimx8mp4g bitbake -k fsl-image-qt5-validation-imx
or
$ MACHINE=smarcimx8mp6g bitbake -k fsl-image-validation-imx


Note
titleNote

fsl-image-validation-imx provides a gui image without QT5. 

fsl-image-qt5-validation-imx provides a Qt5 image for X11, wayland or FB backends depending on your distro name.

If your machine name is smarcimx8mp4g and your gui image is without QT5 , the following command gives you as an example.

$ MACHINE=smarcimx8mp4g bitbake -k fsl-image-validation-imx

The first build takes time.

 

Once it done, you can find all required images under ~/smarc-imx8mp-gatesgarth-release/<build directory>/tmp/deploy/images/<machine name>/

You may want to build programs that aren’t installed into a root file system so you can make them available via a feed site (described below.) To do this you can build the package directly and then build the package named package-index to add the new package to the feed site.

 

The following example builds the tcpdump program and makes it available on the feed site:

Info
iconfalse

$ MACHINE=smarcimx8mp4g bitbake tcpdump
$ MACHINE=smarcimx8mp4g bitbake package-index


Once the build(s) are completed you’ll find the resulting images, rpm and licenses in folder ~/smarc-imx8mp-gatesgarth-release/<build directory>/tmp/deploy.

deploy/images/<machine name>/* 

This folder contains the binary images for the root file system and the Embedian SMARC-iMX8MP specific version of the boot file, Image and device tree file. Specifically the images are:

deploy/images/<machine name>/imx-boot-<machine name>-sd.bin-flash_evk 

This boot file binary for SMARC-iMX8MP 

deploy/images/<machine name>/Image

The kernel Image for SMARC-iMX8MP.  

deploy/images/<machine name>/<device tee file>

Selecting display configuration is a matter of selecting an appropriate DTB file under deploy/images/<machine name>/<device tee file>

All available DTB files are listed in the table below.

 

DTB File NameDescription
imx8mp-smarc.dtbDevice tree blob for no display configuration.
imx8mp-smarc-hdmi.dtbDevice tree blob for HDMI display configuration.
imx8mp-smarc-lvds.dtbDevice tree blob for LVDS display configuration.
imx8mp-smarc-m7.dtbDevice tree blob for Cortex-M7 co-processor configuration.

 

deploy/images/<machine name>/fsl-image-validation-imx-<machine name>.*

Embedian root file system images for software development on Embedian’s SMARC-iMX8MP  platforms without QT5.

deploy/images/<machine name>/fsl-image-qt5-validation-imx-<machine name>.*

Embedian root file system images for software development on Embedian’s SMARC-iMX8MP  with QT5.


deploy/deb/*

  This folder contains all the packages used to construct the root file system images. They are in deb format (similar format to Debian packages) and can be dynamically installed on the target platform via a properly  constructed feed file. Here is an example of the feed file (named base-feeds.conf) that is used internally at Embedian to install upgrades onto a SMARC-iMX8MP platform without reflashing the file system:

Info
iconfalse

src/gz all http://<ip address>/all

src/gz aarch64 http://<ip address>/aarch64

src/gz aarch64-mx8mp http://<ip addresss>/aarch64-mx8m

src/gz smarcimx8mp4g http://<ip addresss>/smarcimx8mp4g


deploy/licenses/* 
A database of all licenses used in all packages built for the system.

Setup SD Card Manually


For these instruction, we are assuming: DISK=/dev/mmcblk0, "lsblk" is very useful for determining the device id.

Info
iconfalse
$ export DISK=/dev/mmcblk0

Erase SD card:

Info
iconfalse

$ sudo dd if=/dev/zero of=${DISK} bs=1M count=160

Create Partition Layout: Leave 2MB offset for boot file.

With util-linux v2.26, sfdisk was rewritten and is now based on libfdisk.

Info
iconfalse
titlesfdisk
$ sudo sfdisk --version
sfdisk from util-linux 2.27.1

Create Partitions:

Info
titlesfdisk >=2.26.x
$ sudo sfdisk ${DISK} <<-__EOF__
2M,48M,0x83,*
50M,,,
__EOF__
Info
titlesfdisk <=2.25
$ sudo sfdisk --in-order --Linux --unit M ${DISK} <<-__EOF__
2,48,0x83,*
,,,-
__EOF__

Format Partitions:

Info
iconfalse
for: DISK=/dev/mmcblk0
$ sudo mkfs.vfat -F 16 ${DISK}p1 -n boot
$ sudo mkfs.ext4 ${DISK}p2 -L rootfs
 
for: DISK=/dev/sdX
$ sudo mkfs.vfat -F 16 ${DISK}1 -n boot
$ sudo mkfs.ext4 ${DISK}2 -L rootfs

Mount Partitions:

On some systems, these partitions may be auto-mounted...

Info
iconfalse
$ sudo mkdir -p /media/boot/
$ sudo mkdir -p /media/rootfs/
 
for: DISK=/dev/mmcblk0
$ sudo mount ${DISK}p1 /media/boot/
$ sudo mount ${DISK}p2 /media/rootfs/
 
for: DISK=/dev/sdX
$ sudo mount ${DISK}1 /media/boot/
$ sudo mount ${DISK}2 /media/rootfs/

Install Boot File (imx-boot-<machine name>-sd.bin-flash_evk)

Boot file is factory default flashed at on-module eMMC flash.

If on-module eMMC Flash is empty

In some cases, when eMMC flash is erased or the u-boot is under development, we need a way to boot from SD card first. Users need to shunt cross the TEST# pin to ground. In this way, SMARC-iMX8MP will always boot up from SD card. 

Fuse flash.bin to the SD card. 

Info
iconfalse
title~/smarc-imx8mp-gatesgarth-release/<build dir>/tmp/deploy/images/<machine name>/

$ sudo dd if=<boot file> of=${DISK} bs=1024 seek=32

If on-module eMMC Flash is not empty

The <boot file> is pre-installed in on-module eMMC flash at factory default. SMARC-iMX8MP is designed to always boot up from on-module eMMC flash and to load Image, device tree blob and root file systems based on the setting of BOOT_SEL. If users need to fuse your own flash.bin or perform u-boot upgrade. This section will instruct you how to do that.

Copy <boot file> to the second partition home directory of your SD card and boot into SD card. Go to home directory and you should see flash.bin file. 

Info
iconfalse
title~/smarc-imx8mp-gatesgarth-release/<build dir>/tmp/deploy/images/<machine name>/

$ sudo cp -v <boot file> /media/rootfs/home/root/

Fuse <boot file> to the on-module eMMC flash. (The eMMC flash is emulated as /dev/mmcblk0 mmcblk2 in SMARC-iMX8MP)

Info
iconfalse
titlehome directory

$ sudo dd if=<boot file> of=/dev/mmcblk0 mmcblk2 bs=1024 seek=32

Note
  1. If your u-boot hasn't been finalized and still under development, it is recommended to shunt cross the test pin and boot directly from SD card first. Once your u-boot is fully tested and finalized, you can fuse your <boot file> to eMMC flash.
  2. When TEST# pin of SMARC-iMX8MP is not shunt crossed, it will always boot up from on-module eMMC flash. U-boot will read the BOOT_SEL configuration and determine where it should load Image and device tree blob. When TEST# is shunt crossed (pull low), it will always boot up from SD card.

uEnv.txt based bootscript

Create "uEnv.txt" boot script: ($ vim uEnv.txt)

Info
iconfalse
title~/uEnv.txt

optargs="video=HDMI-A-1:1920x1080-32@60 consoleblank=0"
#optargs="video=HDMI-A-1:3840x2160-32@30 consoleblank=0"
#optargs="video=HDMI-A-1:3840x2160-32@60 consoleblank=0"
#console port SER3
console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200
#console port SER2
#console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200
#console port SER1
#console=ttymxc3,115200 earlycon=ec_imx6q,0x30a60000,115200
#console port SER0
#console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200
mmcdev=1
mmcpart=1
image=Image
loadaddr=0x40480000
fdt_addr=0x43000000
mmcroot=/dev/mmcblk1p2 rw
usbroot=/dev/sda2 rw
mmcrootfstype=ext4 rootwait fixrtc
netdev=eth0
ethact=FEC0
ipaddr=192.168.1.150
serverip=192.168.1.53
gatewayip=192.168.1.254
mmcargs=setenv bootargs console=${console} root=${mmcroot} rootfstype=${mmcrootfstype} ${optargs}
uenvcmd=run loadimage; run loadfdt; run mmcboot
# USB Boot
#usbargs=setenv bootargs console=${console} root=${usbroot} rootfstype=${mmcrootfstype} ${optargs}
#uenvcmd=run loadusbimage; run loadusbfdt; run usbboot

Copy uEnv.txt to the boot partition:

Info
iconfalse
title~/

$ sudo cp -v ~/uEnv.txt /media/boot/

Install Kernel Image

Copy Image to the boot partition:

Info
iconfalse
title~/smarc-imx8mp-gatesgarth-release/<build dir>/tmp/deploy/images/<machine name>/

$ sudo cp -v Image /media/boot

Install Kernel Device Tree Binary

Info
iconfalse
title~/smarc-imx8mp-gategarth-release/<build dir>/tmp/deploy/images/<machine name>/

$ sudo mkdir -p /media/boot/dtbs

$ sudo cp -v <device tree name> /media/boot/dtbs/imx8mp-smarc.dtb

All available DTB files are listed in the table below.


DTB File NameDescription
imx8mp-smarc.dtbDevice tree blob for no display configuration.
imx8mp-smarc-hdmi.dtbDevice tree blob for HDMI display configuration.
imx8mp-smarc-lvds.dtbDevice tree blob for LVDS display configuration.
imx8mp-smarc-m7.dtbDevice tree blob for Cortex-M7 co-processor configuration.
Note
iconfalse

The device tree name in your SD card has be to imx8mp-smarc.dtb

Install Root File System


Copy Root File System:

Yocto Built Rootfs:

Info
iconfalse
title~/smarc-imx8mp-gatesgarth-release/<build dir>/tmp/deploy/images/<machine name>/

$ sudo tar jxvf <filename.tar.bz2> -C /media/rootfs
Note
titleNote
  1. SMARC-iMX8MP always boots up from on-module eMMC flash first. The firmware in eMMC flash is factory pre-installed from Embedian. It will read the BOOT_SEL configuration that defined by SMARC specification on your carrier board and load Image and device tree blob from the partition one of the device (could be SD card, eMMC, GBE,..etc) that you selected.
  2. MAC address is factory pre-installed at on board I2C EEPROM at offset 60 bytes. It starts with Embedian's vendor code 10:0D:32. u-boot will read it and pass this parameter to kernel.
  3. The kernel modules is included in the Yocto rootfs.

Remove SD card:

Info
iconfalse
$ sync
$ sudo umount /media/boot
$ sudo umount /media/rootfs

Setup SD Card Automatically


This section tells you how to set up an SD card automatically. It mainly uses a script to do all the steps in the above section.

Info
iconfalse

$ cd ~/smarc-imx8mp-gatesgarth-release

$ sudo MACHINE=smarcimx8mp4g sources/meta-smarcimx8mp-gatesgarth/scripts/emb_mk_yocto_sdcard/emb-create-yocto-sdcard.sh /dev/sdX

Note

The default output display is HDMI. If you need to use other device tree output, change "DISPLAY" parameters in the script.

Shunt cross TEST# pin to ground and set the BOOT_SEL to ON OFF OFF. The module will boot up from SD card.  

Feed Packages 


You need to setup Apache2 web server on your development host machine first.

The Apache server default web page directory is /var/www/html .We need to populate it with a link pointing to our deb package repository.

 

Info
sudo ln -s /path/to/build-yocto/tmp/deploy/deb /var/www/html/deb

 

The following procedure can be used on a Embedian SMARC-iMX8MP device to download and utilize the feed file show above to install the tcpdump terminal emulation program:

Info
iconfalse

# vim /etc/apt/sources.list.d/yocto.list

Only keep the following four lines:

deb https://<ip address>/all ./

deb http://<ip address>/cortexa53-crypto ./

deb http://<ip address>/cortexa53-crypto-mx8mp ./

deb http://<ip address>/smarcimx8mp4g ./

Info

# apt-get update

# apt-get upgrade

# apt-get install tcpdump

 

Writing Bitbake Recipes


In order to package your application and include it in the root filesystem image, you must write a BitBake recipe for it.

When starting from scratch, it is easiest to learn by example from existing recipes. 

Example HelloWorld recipe using autotools

For software that uses autotools (./configure; make; make install), writing recipes can be very simple:

 

DESCRIPTION = "Hello World Recipe using autotools"
SECTION = "console/utils"
PRIORITY = "optional"
LICENSE = "GPL"
PR = "r0"
  
S = "${WORKDIR}/git"
  
inherit autotools

 

SRC_URI specifies the location to download the source from. It can take the form of any standard URL using http://, ftp://, etc. It can also fetch from SCM systems, such as git in the example above.

PR is the package revision variable. Any time a recipe is updated that should require the package to be rebuilt, this variable should be incremented.

inherit autotools brings in support for the package to be built using autotools, and thus no other instructions on how to compile and install the software are needed unless something needs to be customized.

S is the source directory variable. This specifies where the source code will exist after it is fetched from SRC_URI and unpacked. The default value is ${WORKDIR}/${PN}-${PV}, where PN is the package name and PV is the package version. Both PN and PV are set by default using the filename of the recipe, where the filename has the format PN_PV.bb.

Example HelloWorld recipe using a single source file

This example shows a simple case of building a helloworld.c file directly using the default compiler (gcc). Since it isn’t using autotools or make, we have to tell BitBake how to build it explicitly.

 

DESCRIPTION = "HelloWorld"
SECTION = "examples"
LICENSE = "GPL"
  
SRC_URI = "file://helloworld.c"
  
S = "${WORKDIR}"
  
do_compile() {
    ${CC} ${CFLAGS} ${LDFLAGS} helloworld.c -o helloworld
}
  
do_install() {
    install -d ${D}${bindir}
    install -m 0755 helloworld ${D}${bindir}
}

 

In this case, SRC_URI specifies a file that must exist locally with the recipe. Since there is no code to download and unpack, we set S to WORKDIR since that is where helloworld.c will be copied to before it is built.

WORKDIR is located at ${OETREE}/<build directory>/tmp/work/cortexa53-crypto-poky-linux/<package name and version> for most packages. If the package is machine-specific (rather than generic for the aarxh64 architecture), it may be located in the cortexa53-crypto-poky-linux subdirectory depending on your hardware (this applies to kernel packages, images, etc).

do_compile defines how to compile the source. In this case, we just call gcc directly. If it isn’t defined, do_compile runs make in the source directory by default.

do_install defines how to install the application. This example runs install to create a bin directory where the application will be copied to and then copies the application there with permissions set to 755.

D is the destination directory where the application is installed to before it is packaged.

${bindir} is the directory where most binary applications are installed, typically /usr/bin.

For a more in-depth explanation of BitBake recipes, syntax, and variables, see the Recipe Chapter of the OpenEmbedded User Manual.

Setup eMMC Manually


Setting up eMMC usually is the last step at development stage after the development work is done at your SD card or NFS environments. From software point of view, eMMC is nothing but a non-removable SD card on board. For SMARC-iMX8MP, the SD card is always emulated as /dev/mmcblk1 and on-module eMMC is always emulated as /dev/mmcblk2. Setting up eMMC now is nothing but changing the device descriptor. 

This section gives a step-by-step procedure to setup eMMC flash. Users can write a shell script your own at production to simplify the steps.

First, we need to backup the final firmware from your SD card or NFS.

Prepare for eMMC binaries from SD card (or NFS):

Insert SD card into your Linux PC. For these instructions, we are assuming: DISK=/dev/mmcblk0, "lsblk" is very useful for determining the device id.

For these instruction, we are assuming: DISK=/dev/mmcblk0, "lsblk" is very useful for determining the device id.

Info
iconfalse
$ export DISK=/dev/mmcblk0

Mount Partitions:

On some systems, these partitions may be auto-mounted...

Info
iconfalse
$ sudo mkdir -p /media/boot/
$ sudo mkdir -p /media/rootfs/
 
for: DISK=/dev/mmcblk0
$ sudo mount ${DISK}p1 /media/boot/
$ sudo mount ${DISK}p2 /media/rootfs/
 
for: DISK=/dev/sdX
$ sudo mount ${DISK}1 /media/boot/
$ sudo mount ${DISK}2 /media/rootfs/

 

Copy Image to rootfs partition:

Info
iconfalse
title~/smarc-imx8mp-gatesgarth-release/<build dir>/tmp/deploy/images/<machine name>
$ sudo cp -v Image /media/rootfs/home/root

Copy uEnv.txt to rootfs partition:

Copy and paste the following contents to /media/rootfs/home/root ($ sudo vim /media/rootfs/home/root/uEnv.txt)

Info
iconfalse

optargs="video=HDMI-A-1:1920x1080-32@60 consoleblank=0"
#optargs="video=HDMI-A-1:3840x2160-32@30 consoleblank=0"
#optargs="video=HDMI-A-1:3840x2160-32@60 consoleblank=0"
#console port SER3
console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200
#console port SER2
#console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200
#console port SER1
#console=ttymxc3,115200 earlycon=ec_imx6q,0x30a60000,115200
#console port SER0
#console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200
mmcdev=2
mmcpart=1
image=Image
loadaddr=0x40480000
fdt_addr=0x43000000
mmcroot=/dev/mmcblk2p2 rw
usbroot=/dev/sda2 rw
mmcrootfstype=ext4 rootwait fixrtc
netdev=eth0
ethact=FEC0
ipaddr=192.168.1.150
serverip=192.168.1.53
gatewayip=192.168.1.254
mmcargs=setenv bootargs console=${console} root=${mmcroot} rootfstype=${mmcrootfstype} ${optargs}
uenvcmd=run loadimage; run loadfdt; run mmcboot
# USB Boot
#usbargs=setenv bootargs console=${console} root=${usbroot} rootfstype=${mmcrootfstype} ${optargs}
#uenvcmd=run loadusbimage; run loadusbfdt; run usbboot

Copy device tree blob to rootfs partition:

Info
iconfalse
title~/smarc-imx8mp-gatesgarth-release/<build dir>/tmp/deploy/images/<machine name>
$ sudo cp -v <device tree blob> /media/rootfs/home/root/imx8mp-smarc.dtb

Copy real rootfs to rootfs partition:

Info
iconfalse
$ pushd /media/rootfs
$ sudo tar cvfz ~/smarcimx8mp-emmc-rootfs.tar.gz .
$ sudo mv ~/smarcimx8mp-emmc-rootfs.tar.gz /media/rootfs/home/root
$ popd

Remove SD card:

Info
iconfalse
$ sync
$ sudo umount /media/boot
$ sudo umount /media/rootfs

Copy Binaries to eMMC from SD card:

Insert this SD card into your SMARC-iMX8MP device.

Now it will be almost the same as you did when setup your SD card, but the eMMC device descriptor is /dev/mmcblk2 now. Booting up the device.

Info
iconfalse
$ export DISK=/dev/mmcblk2

Erase eMMC:

Info
iconfalse

$ sudo dd if=/dev/zero of=${DISK} bs=2M count=16

Create Partition Layout:

Info
iconfalse
$ sudo sfdisk ${DISK} <<-__EOF__
2M,48M,0x83,*
50M,,,
__EOF__

Format Partitions:

Info
iconfalse
$ sudo mkfs.vfat -F 16 ${DISK}p1 -n boot
$ sudo mkfs.ext4 ${DISK}p2 -L rootfs

Mount Partitions:

Info
iconfalse
$ sudo mkdir -p /media/boot/
$ sudo mkdir -p /media/rootfs/
$ sudo mount ${DISK}p1 /media/boot/
$ sudo mount ${DISK}p2 /media/rootfs/

Install binaries for partition 1

Copy uEnv.txt/Image/*.dtb to the boot partition

Info
iconfalse

$ sudo cp -v Image uEnv.txt /media/boot/

Install Kernel Device Tree Binary

Info
iconfalse
$ sudo mkdir -p /media/boot/dtbs
$ sudo cp -v imx8mp-smarc.dtb /media/boot/dtbs/

Install Root File System


Info
iconfalse
$ sudo tar -zxvf smarcimx8mp-emmc-rootfs.tar.gz -C /media/rootfs

 

Unmount eMMC:

Info
iconfalse
$ sync
$ sudo umount /media/boot
$ sudo umount /media/rootfs

 

Switch your Boot Select to eMMC and you will be able to boot up from eMMC now.

Setup eMMC Automatically 


Boot up the module from SD card and run the following script. The Yocto images will be written into on-module eMMC.

Info
iconfalse

$ emb-create-yocto-emmc.sh /dev/mmcblk2 >/dev/null 2>&1

 Shutdown the device. Set TEST# pin floating and set the BOOT_SEL to OFF ON ON. The module will boot up from on-module eMMC. 

Video Decoding


For playing video, we can use three solutions to support it. 

a) # gplay-1.0 <video file>

b) # gst-launch-1.0 playbin uri=file://<video absolute path>

c) ( i ) if video container on .mp4 format

          # gst-launch-1.0 filesrc location=<file name.mp4> typefind=true ! video/quicktime ! qtdemux ! queue max-size-time=0 ! vpudec ! queue max-size-time=0 ! kmssink force-hantrope=true sync=false &

    ( ii ) if video container on .ts format

         # gst-launch-1.0 filesrc location=<file name.ts> typefind=true ! video/mpegts ! tsdemux ! queue max-size-time=0 ! vpudec ! queue max-size-time=0 ! waylandsink

 

WiFi 


The BSP includes NXP 88W8997 wifi chipset. Users can choose mPCIe or M.2 key E form factor wifi modules based on NXP 88W8997 chipset. 

M.2 Form Factor:

  • AzureWave P/N: AW-CM276MA-PUR
  • Laird Connectivity P/N: 60-2230C
  • Embedded Artists 1YM M.2 Module

mPCIe Factor:

  • Globascale Technologies NXP 88W8997 2x2 WiFi 802.11ac+BT 5.0 mini PCIe Card w/ Two External SMA Antennas


Get 88W8997 Firmware

 

Info
iconfalse
$ git clone https://github.com/NXP/imx-firmware.git -b lf-5.10.y_1.0.0

Copy the firmware imx-firmware/nxp/FwImage_8997/pcieuart8997_combo_v4.bin into device /lib/firmware/nxp/ directory. (Replace the original one)

Boot up the device and load the driver modules in the kernel.

Info
iconfalse

root@smarcimx8mp4g:~# modprobe moal mod_para=nxp/wifi_mod_para.conf
[ 33.834782] can2-stby: disabling
[ 33.838051] VSD1_3V3: disabling

[ 33.979809] wlan: Loading MWLAN driver
[ 33.984701] wlan_pcie 0000:01:00.0: enabling device (0000 -> 0002)
[ 33.991014] Attach moal handle ops, card interface type: 0x204
[ 34.000829] PCIE8997: init module param from usr cfg
[ 34.005845] card_type: PCIE8997, config block: 0
[ 34.010483] cfg80211_wext=0xf
[ 34.013465] wfd_name=p2p
[ 34.016011] max_vir_bss=1
[ 34.018632] cal_data_cfg=none
[ 34.021611] drv_mode = 7
[ 34.024159] ps_mode = 2
[ 34.026604] auto_ds = 2
[ 34.029084] fw_name=nxp/pcieuart8997_combo_v4.bin
[ 34.033830] rx_work=1 cpu_num=4
[ 34.037010] Attach mlan adapter operations.card_type is 0x204.
[ 34.046917] Request firmware: nxp/pcieuart8997_combo_v4.bin
[ 35.013725] FW download over, size 627620 bytes
[ 35.879247] WLAN FW is active
[ 35.882226] on_time is 35807347500
[ 35.917890] fw_cap_info=0x18fcffa3, dev_cap_mask=0xffffffff
[ 35.923500] max_p2p_conn = 8, max_sta_conn = 8
[ 35.956580] wlan: version = PCIE8997-16.68.10.p16-MXM5X16214-GPL-(FP92)
[ 35.966307] wlan: Driver loaded successfully
root@smarcimx8mp4g:~#


Verify that the module is now visible to the system.
 

Info
iconfalse

root@smarcimx8mp4g:~# ifconfig -a
can0: flags=128<NOARP> mtu 16
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 10 (UNSPEC)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 35

can1: flags=128<NOARP> mtu 16
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 10 (UNSPEC)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 36

eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 10:0d:32:01:00:01 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

eth1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 10:0d:32:02:00:01 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 54

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 3452 bytes 216146 (211.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3452 bytes 216146 (211.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

mlan0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 4a:6b:15:b3:7f:a4 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

p2p0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 2a:08:86:b1:27:cb txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

uap0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 5a:57:c4:46:2b:68 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

root@smarcimx8mp4g:~#


In case you need to see which network and you can scan it and select the one you need.
 

Info
iconfalse

root@pitximx8mp4g:~# iwlist mlan0 scan
mlan0 Scan completed :
Cell 01 - Address: D8:FE:E3:5F:68:98
ESSID:"Risetek"
Mode:Master
Frequency=2.412 GHz (Channel 1)


Identify the network and add it to the WPA supplicant file.

Info
iconfalse

root@smarcimx8mp4g:~# vim /etc/wpa_supplicant.conf

Info
iconfalse

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
update_config=1

network={
scan_ssid=1
ssid="embedian"
psk="xxxxxxxxxx"
}


Associate the Wi-Fi with config

Info
iconfalse

root@smarcimx8mp4g:~# wpa_supplicant -B -i mlan0 -c /etc/wpa_supplicant.conf
Successfully initialized wpa_supplicant
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
nl80211: kernel reports: Match already configured
rfkill: Cannot open RFKILL control device
root@smarcimx8mp4g:~#


Check if you have right SSID associated.

Info
iconfalse

root@smarcimx8mp4g:~# iwconfig mlan0
mlan0 IEEE 802.11-DS ESSID:"embedian" [14]
Mode:Managed Frequency=5.745 GHz Access Point: 48:EE:0C:ED:D7:38
Bit Rate:6.5 Mb/s Tx-Power=24 dBm
Retry limit:9 RTS thr=2347 B Fragment thr=2346 B
Encryption key:****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-****-**** Security mode:open
Power Management:off
Link Quality=3/5 Signal level=-66 dBm Noise level=-91 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:27439
Tx excessive retries:8 Invalid misc:24 Missed beacon:0

root@smarcimx8mp4g:~#


Use DHCP to get IP

Info
iconfalse

root@smarcimx8mp4g:~# udhcpc -i mlan0
udhcpc: started, v1.32.0
udhcpc: sending discover
udhcpc: sending select for 192.168.1.57
udhcpc: lease of 192.168.1.57 obtained, lease time 86400
/etc/udhcpc.d/50default: Adding DNS 192.168.1.254
root@smarcimx8mp4g:~#


You should be able to ping local network now.

Info
iconfalse

root@smarcimx8mp4g:~# ping 192.168.1.10
PING 192.168.1.10 (192.168.1.10) 56(84) bytes of data.
64 bytes from 192.168.1.10: icmp_seq=1 ttl=64 time=2141 ms
64 bytes from 192.168.1.10: icmp_seq=2 ttl=64 time=1120 ms
64 bytes from 192.168.1.10: icmp_seq=3 ttl=64 time=95.7 ms
64 bytes from 192.168.1.10: icmp_seq=4 ttl=64 time=1.63 ms

 

Modify /etc/resolv.conf of your preference, you will be able to ping out.

Info
iconfalse

root@smarcimx8mp4g:~# vim /etc/resolv.conf

Info
iconfalse

nameserver 8.8.8.8
nameserver 8.8.4.4

Info
iconfalse

root@pitximx8mp4g:/etc# ping www.google.com
PING www.google.com (172.217.163.36) 56(84) bytes of data.
64 bytes from maa05s01-in-f4.1e100.net (172.217.163.36): icmp_seq=1 ttl=117 time=7.23 ms
64 bytes from tsa01s13-in-f4.1e100.net (172.217.163.36): icmp_seq=2 ttl=117 time=39.7 ms
64 bytes from maa05s01-in-f4.1e100.net (172.217.163.36): icmp_seq=3 ttl=117 time=7.50 ms
64 bytes from tsa01s13-in-f4.1e100.net (172.217.163.36): icmp_seq=4 ttl=117 time=5.29 ms
64 bytes from tsa01s13-in-f4.1e100.net (172.217.163.36): icmp_seq=5 ttl=117 time=4.65 ms
64 bytes from tsa01s13-in-f4.1e100.net (172.217.163.36): icmp_seq=6 ttl=117 time=5.01 ms

--- www.google.com ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5010ms
rtt min/avg/max/mdev = 4.649/11.560/39.682/12.623 ms

 

version 1.0a, 10/25/2021

Last updated 2022-06-17