...
Info | ||||
---|---|---|---|---|
| ||||
$ sudo cp -v MLO /media/boot/ $ sudo cp -v u-boot.img /media/boot/ |
uEnv.txt based bootscript
...
Info | ||||
---|---|---|---|---|
| ||||
$ sudo cp -v ./uEnv.txt /media/boot/ |
Install Kernel zImage
Copy zImage to the boot partition:
...
Info | ||
---|---|---|
| ||
$ sudo mkdir -p /media/boot/dtbs $ sudo cp -v arch/arm/boot/dts/am335x-smarct335x.dtb /media/boot/dtbs |
Install Root File System and Kernel Modules
...
Info | ||||
---|---|---|---|---|
| ||||
auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp |
Remove SD card:
Info | ||
---|---|---|
| ||
$ sync $ sudo umount /media/boot $ sudo umount /media/rootfs |
...
Note |
---|
For kernel 3.14.y and after, the serial port device descriptor changes from ttyO to ttyS The above uEnv.txt file needs to change accordingly. (ttyO3 --> ttyS3) |
Copy uEnv.txt to the boot Copy real rootfs to rootfs partition:
...
Insert this SD card into your SMARC T335X device and boot up the devices from SD card.
Now it will be almost the same as you did when setup your SD card, but the eMMC device descriptor is /dev/mmcblk1 now.
...